芯片是ESP32-D0WD
外殼是ESP WROOM 32D
用的是arduino IDE 2.2.1
開發板選的是 esp32 dev module
按 en 和 boot 可以進入
rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2))
waiting for download
也可以正常刷寫程序，但是就一直打印下面這些文字：
E (119) cpu_start: Running on single core variant of a chip, but app is built with multi-core support.
E (119) cpu_start: Check that CONFIG_FREERTOS_UNICORE is enabled in menuconfig
abort() was called at PC 0x400826c5 on core 0
Backtrace: 0x400830c9:0x3ffe3b90 0x40087cf1:0x3ffe3bb0 0x4008c9ad:0x3ffe3bd0 0x400826c5:0x3ffe3c50 0x40079306:0x3ffe3c90 |<-CORRUPTED
ELF file SHA256: b4fc0ab4694a346b
E (144) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting...
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0030,len:1184
load:0x40078000,len:13260
load:0x40080400,len:3028
entry 0x400805e4
查了半天說是什么單核的，搞不懂什么問題。
求大神幫忙
|
QQ好友和群
QQ空間
騰訊微博
騰訊朋友
收藏
淘帖
頂
踩
