這個PCF8591的stm32程序如何輸出“正弦波_方波_鋸齒波”？請教！

ID:82098 · 發表于 2018-6-5 15:36

請教！這個程序如何輸出“正弦波_方波_鋸齒波”？

單片機源程序如下:

/******************** (C) COPYRIGHT 2013 CEPARK多功能開發學習板********************
* 文件名：main.c
* 描述：CPU通過控制PCF8591輸出不同模擬值，使LED燈漸暗漸明。
* 實驗平臺：CEPARK多功能開發學習板
* 庫版本：ST3.5.0
* 硬件連接：------------------------
* 單片機IO | PB10 - JP68 - SCL | AD/DA轉換模塊
| PB11 - JP68 - SDA |
* ------------------------
* 硬件連接：JP66短接，用于AD顯示
* 硬件連接：J3上端連接到核心板的J7（3.3V）
**********************************************************************************/
#include "stm32f10x.h"
#include "PCF8591.h"
#include "delay.h"
#include "iic.h"
/*
* 函數名：main
* 描述 : 主函數
* 輸入：無
* 輸出 : 無
*/
int main(void)
{
u8 i;
/* 設置系統時鐘為72M */
SystemInit();
PCF8591_Init(); //IIC初始化
while(1)
{
for(i=255;i>0;i--)
{
pcf8591_da_write(i);
delay_ms(10);
}
delay_ms(500);
for(i=0;i<255;i++)
{
pcf8591_da_write(i);
delay_ms(10);
}
}
}

復制代碼

所有資料51hei提供下載:

PCF8591 DA實驗.rar (268.27 KB, 下載次數: 59)

ID:155507 · 發表于 2018-6-5 22:20

DA芯片先輸出高電平，延時一下，再輸出低電平，再延時一下，如此反復就是方波。
三角波、正弦波一個道理。

/* Includes ------------------------------------------------------------------*/
#include "stm32f4_discovery.h"
#include <stdio.h>
/* Private typedef -----------------------------------------------------------*/
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
TIM_OCInitTypeDef TIM_OCInitStructure;
/* Private define ------------------------------------------------------------*/
// This is the magic number used to increment the phase accumulator
#define R 107374182
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
uint16_t sinetable[] = {
127,130,133,136,139,143,146,149,152,155,158,161,164,167,170,173,176,178,181,184,187,190,192,195,198,200,203,205,208,210,212,215,217,219,221,223,225,227,229,231,233,234,236,238,239,240,
242,243,244,245,247,248,249,249,250,251,252,252,253,253,253,254,254,254,254,254,254,254,253,253,253,252,252,251,250,249,249,248,247,245,244,243,242,240,239,238,236,234,233,231,229,227,225,223,
221,219,217,215,212,210,208,205,203,200,198,195,192,190,187,184,181,178,176,173,170,167,164,161,158,155,152,149,146,143,139,136,133,130,127,124,121,118,115,111,108,105,102,99,96,93,90,87,84,81,78,
76,73,70,67,64,62,59,56,54,51,49,46,44,42,39,37,35,33,31,29,27,25,23,21,20,18,16,15,14,12,11,10,9,7,6,5,5,4,3,2,2,1,1,1,0,0,0,0,0,0,0,1,1,1,2,2,3,4,5,5,6,7,9,10,11,12,14,15,16,18,20,21,23,25,27,29,31,
33,35,37,39,42,44,46,49,51,54,56,59,62,64,67,70,73,76,78,81,84,87,90,93,96,99,102,105,108,111,115,118,121,124
};
uint16_t pulse_width = 128;
uint32_t phase_accumulator = 0;
uint8_t angle = 0;
/* Private function prototypes -----------------------------------------------*/
void TIM_Config(void);
void PWM_Config(int period);
void PWM_SetDC(uint16_t channel,uint16_t dutycycle);
void Delay(__IO uint32_t nCount);
void LED_Config(void);
void INTTIM_Config(void);
/* Private functions ---------------------------------------------------------*/
void TIM2_IRQHandler(void)
{
if (TIM_GetITStatus(TIM2, TIM_IT_Update) != RESET)
{
GPIO_SetBits(GPIOD, GPIO_Pin_13);
PWM_SetDC(1,pulse_width);
// Calculate a new pulse width
phase_accumulator+=R;
angle=(uint8_t)(phase_accumulator>>24);
pulse_width = sinetable[angle];
TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
GPIO_ResetBits(GPIOD, GPIO_Pin_13);
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* TIM Configuration */
TIM_Config();
/* LED Configuration */
LED_Config();
/* PWM Configuration */
PWM_Config(256);
/* Sampling rate timer */
INTTIM_Config();
PWM_SetDC(1,128);
PWM_SetDC(2,128);
PWM_SetDC(3,128);
PWM_SetDC(4,128);
while (1)
{
// Wait for sampling clock to overflow
if (TIM_GetFlagStatus(TIM2, TIM_FLAG_Update) != RESET)
{
}
}
}
/**
* @brief Configure the TIM3 Ouput Channels.
* @param None
* @retval None
*/
void TIM_Config(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* TIM3 clock enable */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);
/* GPIOC and GPIOB clock enable */
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC | RCC_AHB1Periph_GPIOB, ENABLE);
/* GPIOC Configuration: TIM3 CH1 (PC6) and TIM3 CH2 (PC7) */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 ;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP ;
GPIO_Init(GPIOC, &GPIO_InitStructure);
/* GPIOB Configuration: TIM3 CH3 (PB0) and TIM3 CH4 (PB1) */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP ;
GPIO_Init(GPIOB, &GPIO_InitStructure);
/* Connect TIM3 pins to AF2 */
GPIO_PinAFConfig(GPIOC, GPIO_PinSource6, GPIO_AF_TIM3);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource7, GPIO_AF_TIM3);
GPIO_PinAFConfig(GPIOB, GPIO_PinSource0, GPIO_AF_TIM3);
GPIO_PinAFConfig(GPIOB, GPIO_PinSource1, GPIO_AF_TIM3);
}
void PWM_Config(int period)
{
uint16_t PrescalerValue = 0;
/* -----------------------------------------------------------------------
TIM3 Configuration: generate 4 PWM signals with 4 different duty cycles.
In this example TIM3 input clock (TIM3CLK) is set to 2 * APB1 clock (PCLK1),
since APB1 prescaler is different from 1.
TIM3CLK = 2 * PCLK1
PCLK1 = HCLK / 4
=> TIM3CLK = HCLK / 2 = SystemCoreClock /2
To get TIM3 counter clock at 28 MHz, the prescaler is computed as follows:
Prescaler = (TIM3CLK / TIM3 counter clock) - 1
Prescaler = ((SystemCoreClock /2) /28 MHz) - 1
To get TIM3 output clock at 30 KHz, the period (ARR)) is computed as follows:
ARR = (TIM3 counter clock / TIM3 output clock) - 1
= 665
Note:
SystemCoreClock variable holds HCLK frequency and is defined in system_stm32f4xx.c file.
Each time the core clock (HCLK) changes, user had to call SystemCoreClockUpdate()
function to update SystemCoreClock variable value. Otherwise, any configuration
based on this variable will be incorrect.
----------------------------------------------------------------------- */
/* No prescale, run at maximum frequency */
PrescalerValue = 0;
/* Time base configuration */
TIM_TimeBaseStructure.TIM_Period = period;
TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
/* PWM1 Mode configuration: Channel1 */
TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_Pulse = 0;
TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
TIM_OC1Init(TIM3, &TIM_OCInitStructure);
TIM_OC1PreloadConfig(TIM3, TIM_OCPreload_Enable);
/* PWM1 Mode configuration: Channel2 */
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_Pulse = 0;
TIM_OC2Init(TIM3, &TIM_OCInitStructure);
TIM_OC2PreloadConfig(TIM3, TIM_OCPreload_Enable);
/* PWM1 Mode configuration: Channel3 */
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_Pulse = 0;
TIM_OC3Init(TIM3, &TIM_OCInitStructure);
TIM_OC3PreloadConfig(TIM3, TIM_OCPreload_Enable);
/* PWM1 Mode configuration: Channel4 */
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_Pulse = 0;
TIM_OC4Init(TIM3, &TIM_OCInitStructure);
TIM_OC4PreloadConfig(TIM3, TIM_OCPreload_Enable);
TIM_ARRPreloadConfig(TIM3, ENABLE);
/* TIM3 enable counter */
TIM_Cmd(TIM3, ENABLE);
}
void PWM_SetDC(uint16_t channel,uint16_t dutycycle)
{
if (channel == 1)
{
TIM3->CCR1 = dutycycle;
}
else if (channel == 2)
{
TIM3->CCR2 = dutycycle;
}
else if (channel == 3)
{
TIM3->CCR3 = dutycycle;
}
else
{
TIM3->CCR4 = dutycycle;
}
}
void LED_Config(void)
{
/* GPIOD Periph clock enable */
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD, ENABLE);
/* Configure PD12, PD13, PD14 and PD15 in output pushpull mode */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13| GPIO_Pin_14| GPIO_Pin_15;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOD, &GPIO_InitStructure);
}
void INTTIM_Config(void)
{
NVIC_InitTypeDef NVIC_InitStructure;
/* Enable the TIM2 gloabal Interrupt */
NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
/* TIM2 clock enable */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
/* Time base configuration */
TIM_TimeBaseStructure.TIM_Period = 10 - 1; // 1 MHz down to 100 KHz
TIM_TimeBaseStructure.TIM_Prescaler = 84 - 1;
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
/* TIM IT enable */
TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
/* TIM2 enable counter */
TIM_Cmd(TIM2, ENABLE);
}
/**
* @brief Delay Function.
* @param nCount:specifies the Delay time length.
* @retval None
*/
void Delay(__IO uint32_t nCount)
{
while(nCount--)
{
}
}

復制代碼

ID:780116 · 發表于 2020-6-28 11:34

請問這是用的stm32那個系列的芯片

帳號		自動登錄	找回密碼
密碼			立即注冊

欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136

這個PCF8591的stm32程序如何輸出“正弦波_方波_鋸齒波”？請教！

這個PCF8591的stm32程序如何輸出“正弦波_方波_鋸齒波”？請教！