標題: 用gokit2的arduino底板做漂亮的4通道示波器和信號發生器 [打印本頁] 作者: 機智小子 時間: 2017-5-12 16:06 標題: 用gokit2的arduino底板做漂亮的4通道示波器和信號發生器 去年申請的gokit2的arduino底板其實就是個完整的arduino板子，其實可以玩很多東西，一直想要個漂亮的示波器，終于找到這個，看下面的網址：
www點instructables點com/id/Oscilloscope-Arduino-Processing/
這個介紹的很詳細，簡單的說就是給板子燒錄程序，然后用A0，A1，A2，A3四個模擬口檢測信號，得到的數據通過串口傳給電腦，上位機軟件展示4路波形，還能量波形。上位機軟件做的很漂亮，但不是英文的，自己摸索一下，很簡單，有WIN32、64和linux版�？上]有MAC的。
Download and unzip the Processing program to run on the computer. Choose the correct one below:
You already have the oscilloscope program running and the Arduino connected to the computer by USB port. Now you have to connect to each other by "serial".
In the "Configurar a serial" (Configure the Serial) box, click "Serial" until theCOMwhere the Arduino is connected appears.(if it did not appear, click " * " to update)
Click "off" to switch to "on"
If everything is correct, the oscilloscope will do a first reading showing the noises because the channels A0 (ch-0), A1 (ch-1), A2 (ch-2) and A3 (ch-3) are not connected to any signal.
In the "Amostragem" (Sampling) box, click "varias" (various) so that the reading is continuous.
