美女一区二区在线观看,真希友田视频国产精品在线看,久草大香蕉在线视频

/*****************************************************************************************************
* 作者：Ken *
* 日期：2012,8,19 *
* 功能： *
* 注意：1.由于是軟件仿真的原因，每次仿真時只有卡1在斷電后完全正確，其他卡斷電后可能會在輸入密碼時 *
* 出現密碼錯誤。 *
* 2.剛開始我想實現利用定時器實現操作倒計時，但多次試驗后都沒有正常工作，希望有興趣的朋友試試 *
* 3.其實還有很多的功能可以實現，例如在取時任意取，操作倒計時等，大家有機會可以做做， *
* 大家共同進步。
* *
* *
******************************************************************************************************/
#include<main.h>
#include<i2c.h>
#include<12864.h>
#include<font.h>
#include<key.h>
#include<ffont.h>
sbit key_leave=P2^7; //退出鍵
sbit beep=P1^7;
uchar buf[PASSWORD_NUM]; //密碼暫存器
typedef struct
{
uchar codes[PASSWORD_NUM]; //密碼1
uint money;
}PASSWORD ;
uchar ka_flag=0; //判斷卡號
bit password_flag=0;
uchar deal_flag=0; //卡相關操作
bit new_password_flag=0; //新密碼正確性標志位
bit qukuan_flag=0; //存標志
PASSWORD password1,password2,password3,password4; //定義結構體變量
void soft_reset(void)
{
((void (code *) (void)) 0x0000) ();
}
/***
*******延時1Ms函數
***/
void delay(uint x)
{
uint m,n;
for(m=x;m>0;m--)
for(n=110;n>0;n--);
}
/***
*******蜂鳴器函數
****/
void buzzer()
{
beep=0;
delay(100);
beep=1;
}
/***
******密碼對比函數
*****返回值：1 密碼錯誤
返回值：0 密碼正確
***/
bit password_check(uchar *buf1,uchar *buf2)
{
uchar i;
for(i=0;i<PASSWORD_NUM;i++)
{
if( buf1[i] != buf2[i] )
{
return 1;
}
}
return 0;
}
/*****
*******顯示函數
*****/
void display(uint MONey)
{
uchar date[5];
lcd_hanzi_str(1,1,nideyue,5);
date[0]=MONey/10000%10;
date[1]=MONey/1000%10;
date[2]=MONey/100%10;
date[3]=MONey/10%10;
date[4]=MONey%10;
lcd_ch(2,4,num+16*date[0]);
lcd_ch(2,5,num+16*date[1]);
lcd_ch(2,6,num+16*date[2]);
lcd_ch(2,7,num+16*date[3]);
lcd_ch(2,8,num+16*date[4]);
lcd_hanzi(2,5,yuan);
lcd_hanzi_str(3,2,anjinhaotuichu,7);
while( key_leave==1);
buzzer();
}
/***
******密碼輸入函數
***/
void password_input(uchar *date )
{
uchar count;
char key_val;
lcd_clear_scr();
lcd_hanzi_str(0,0,qingshurumima,7);
lcd_ch_str(2,4,hengxian,6);
lcd_hanzi_str(3,3,anjinhaoqueren,5);
count=0;
while( count<PASSWORD_NUM )
{
key_val=key();
if(key_val == -1)
continue;
else if( (key_val>=0)&&(key_val<=9) )
{
buzzer();
date[count]=key_val;
lcd_ch(2,4+count,xinghao);
count++;
}
}
while( key() != KEY_ENTER);
buzzer();
}
/***
******存函數
******說明：user:用戶名
***/
void Cunkuan(uchar user )
{
ulong ac=0;
lcd_clear_scr();
lcd_hanzi_str(2,0,qingxuanzequchejine,8);
delay(1000);
lcd_clear_scr();
lcd_ch_str(0,0,yibai,3);
lcd_ch_str(0,13,erbai,3);
lcd_ch_str(3,0,yiqian,4);
lcd_ch_str(3,13,wubai,3);
while( (k5!=0)&&(k6!=0)&&(k7!=0)&&(k8!=0) );
buzzer();
while(1)
{
if(k5==0)
{
delay(2);
if(k5==0)
{
while(!k5);
ac+=200;
}
}
if(k6==0)
{
delay(2);
if(k6==0)
{
while(!k6);
ac+=500;
}
}
if(k7==0)
{
delay(2);
if(k7==0)
{
while(!k7);
ac+=1000;
}
}
if(k8==0)
{
delay(2);
if(k8==0)
{
while(!k8);
ac+=100;
}
}
//存出來
switch(user)
{
case 1:
I2C_read_buf(PASSWORD_ADD,(uchar*)&password1,sizeof(PASSWORD)); //卡1
ac=ac+password1.money;
password1.money=ac;
if( !I2C_write_buf(PASSWORD_ADD,(uchar *)&password1,sizeof(PASSWORD)) )
qukuan_flag=1; //取成功
else
qukuan_flag=0;
ac=0;
break;
case 2:
I2C_read_buf(PASSWORD_ADD1,(uchar*)&password2,sizeof(PASSWORD)); //卡1
ac=ac+password2.money;
password2.money=ac;
if( !I2C_write_buf(PASSWORD_ADD1,(uchar *)&password2,sizeof(PASSWORD)) )
qukuan_flag=1; //取成功
else
qukuan_flag=0;
ac=0;
break;
case 3:
I2C_read_buf(PASSWORD_ADD2,(uchar*)&password3,sizeof(PASSWORD)); //卡1
ac=ac+password3.money;
password3.money=ac;
if( !I2C_write_buf(PASSWORD_ADD2,(uchar *)&password3,sizeof(PASSWORD)) )
qukuan_flag=1; //取成功
else
qukuan_flag=0;
ac=0;
break;
case 4:
I2C_read_buf(PASSWORD_ADD3,(uchar*)&password4,sizeof(PASSWORD)); //卡1
ac=ac+password4.money;
password4.money=ac;
if( !I2C_write_buf(PASSWORD_ADD3,(uchar *)&password4,sizeof(PASSWORD)) )
qukuan_flag=1; //取成功
else
qukuan_flag=0;
ac=0;
break;
}
lcd_clear_scr();
if(qukuan_flag==1)
{
lcd_hanzi_str(1,1,caozuochenggong,5);
lcd_hanzi_str(2,1,anjinhaotuichu,7);
}
else
{
lcd_hanzi_str(1,1,caozuoshibai,5);
lcd_hanzi_str(2,1,anjinhaotuichu,7);
}
while(key_leave!=0);
buzzer();
break;
}
}
/***
******取函數
******說明：user:用戶名
***/
void Qukuan(uchar user )
{
int ac=0;
lcd_clear_scr();
lcd_hanzi_str(2,0,qukuanjine,8);
delay(1000);
lcd_clear_scr();
lcd_ch_str(0,0,yibai,3);
lcd_ch_str(0,13,erbai,3);
lcd_ch_str(3,0,yiqian,4);
lcd_ch_str(3,13,wubai,3);
while( (k5!=0)&&(k6!=0)&&(k7!=0)&&(k8!=0) );
buzzer();
while(1)
{
if(k5==0)
{
delay(2);
if(k5==0)
{
while(!k5);
ac=ac-200;
}
}
if(k6==0)
{
delay(2);
if(k6==0)
{
while(!k6);
ac=ac-500;
}
}
if(k7==0)
{
delay(2);
if(k7==0)
{
while(!k7);
ac=ac-1000;
}
}
if(k8==0)
{
delay(2);
if(k8==0)
{
while(!k8);
ac=ac-100;
}
}
ac=-ac;
//存出來
switch(user)
{
case 1:
I2C_read_buf(PASSWORD_ADD,(uchar*)&password1,sizeof(PASSWORD)); //卡1
ac=password1.money-ac;
// 余量不足100，禁止操作
if(ac<100)
{
lcd_clear_scr();
lcd_hanzi_str(1,1,yuebuzu,6);
lcd_hanzi_str(1,2,jinzhicaozuo,5);
break;
}
password1.money=ac;
if( !I2C_write_buf(PASSWORD_ADD,(uchar *)&password1,sizeof(PASSWORD)) )
qukuan_flag=1; //取成功
else
qukuan_flag=0;
ac=0;
break;
case 2:
I2C_read_buf(PASSWORD_ADD1,(uchar*)&password2,sizeof(PASSWORD)); //卡1
ac=password2.money-ac;
// 余量不足100，禁止操作
if(ac<100)
{
lcd_clear_scr();
lcd_hanzi_str(1,1,yuebuzu,6);
lcd_hanzi_str(1,2,jinzhicaozuo,5);
break;
}
password2.money=ac;
if( !I2C_write_buf(PASSWORD_ADD1,(uchar *)&password2,sizeof(PASSWORD)) )
qukuan_flag=1; //取成功
else
qukuan_flag=0;
ac=0;
break;
case 3:
I2C_read_buf(PASSWORD_ADD2,(uchar*)&password3,sizeof(PASSWORD)); //卡1
ac=password3.money-ac;
// 余量不足100，禁止操作
if(ac<100)
{
lcd_clear_scr();
lcd_hanzi_str(1,1,yuebuzu,6);
lcd_hanzi_str(1,2,jinzhicaozuo,5);
break;
}
password3.money=ac;
if( !I2C_write_buf(PASSWORD_ADD2,(uchar *)&password3,sizeof(PASSWORD)) )
qukuan_flag=1; //取成功
else
qukuan_flag=0;
ac=0;
break;
case 4:
I2C_read_buf(PASSWORD_ADD3,(uchar*)&password4,sizeof(PASSWORD)); //卡1
ac=password4.money-ac;
// 余量不足100，禁止操作
if(ac<100)
{
lcd_clear_scr();
lcd_hanzi_str(1,1,yuebuzu,6);
lcd_hanzi_str(1,2,jinzhicaozuo,5);
break;
}
password4.money=ac;
if( !I2C_write_buf(PASSWORD_ADD3,(uchar *)&password4,sizeof(PASSWORD)) )
qukuan_flag=1; //取成功
else
qukuan_flag=0;
ac=0;
break;
}
lcd_clear_scr();
if(qukuan_flag==1) //操作成功！
{
lcd_hanzi_str(1,1,caozuochenggong,5);
lcd_hanzi_str(2,1,anjinhaotuichu,8);
}
else
{
lcd_hanzi_str(1,1,caozuoshibai,5);
lcd_hanzi_str(2,1,anjinhaotuichu,7);
}
while(key_leave!=0);
buzzer();
break;
}
}
/***
******重設密碼的地址和
***/
void set_eeprom_init()
{
uchar ad=0;
for(ad=0;ad<6;ad++)
{
password4.codes[ad]=buf[ad];
}
I2C_write_buf(PASSWORD_ADD3,(uchar *)&password4,sizeof(PASSWORD));
for(ad=0;ad<6;ad++)
{
password1.codes[ad]=buf[ad];
}
I2C_write_buf(PASSWORD_ADD,(uchar *)&password1,sizeof(PASSWORD));
for(ad=0;ad<6;ad++)
{
password2.codes[ad]=buf[ad];
}
I2C_write_buf(PASSWORD_ADD1,(uchar *)&password2,sizeof(PASSWORD));
for(ad=0;ad<6;ad++)
{
password3.codes[ad]=buf[ad];
}
I2C_write_buf(PASSWORD_ADD2,(uchar *)&password3,sizeof(PASSWORD));
}
/***
******重設密碼函數
******說明：user:用戶名
***/
void input_new_password(uchar user)
{
while(1)
{
//第一次輸入密碼
password_input(buf);
delay(50);
lcd_clear_scr();
lcd_hanzi_str(2,1,set_again,6);
delay(1000);
lcd_clear_scr();
//第二次輸入密碼
switch(user)
{
case 1:
password_input(password1.codes); //第二次輸入密碼
if( !(password_check(buf,password1.codes) ) ) //判斷密碼正確性
{
if( !I2C_write_buf(PASSWORD_ADD,(uchar *)&password1,sizeof(PASSWORD)) ) //判斷寫入I2C信息是否成功
{
new_password_flag=1; //重設密碼成功
}
else
new_password_flag=0; //重設密碼失敗
}
else
// 設置密碼不成功
new_password_flag=0;
break;
case 2:
password_input(password2.codes); //第二次輸入密碼
if( !(password_check(buf,password2.codes) ) ) //密碼正確
{
if( !I2C_write_buf(PASSWORD_ADD1,(uchar *)&password2,sizeof(PASSWORD)) ) //判斷寫入I2C信息是否成功
{
new_password_flag=1;
}
else
new_password_flag=0;
}
else
// 設置密碼不成功
new_password_flag=0;
break;
case 3:
password_input(password3.codes); //第二次輸入密碼
if( !(password_check(buf,password3.codes) ) ) //密碼正確
{
if( !I2C_write_buf(PASSWORD_ADD2,(uchar *)&password3,sizeof(PASSWORD)) )//判斷寫入I2C信息是否成功
{
new_password_flag=1;
}
else
new_password_flag=0;
}
else
// 設置密碼不成功
new_password_flag=0;
break;
case 4:
password_input(password4.codes); //第二次輸入密碼
if( !(password_check(buf,password4.codes) ) ) //密碼正確
{
if( !I2C_write_buf(PASSWORD_ADD3,(uchar *)&password4,sizeof(PASSWORD)) ) //判斷寫入I2C信息是否成功
{
new_password_flag=1;
}
else
new_password_flag=0;
}
else
// 設置密碼不成功
new_password_flag=0;
break;
}
//兩次輸入密碼正確處理
if(new_password_flag==1)
{
lcd_clear_scr();
lcd_hanzi_str(2,1,set_success,8); //設置密碼成功！
delay(1000);
break;
}
//兩次輸入密碼不一樣處理
else
{
lcd_clear_scr();
lcd_hanzi_str(2,1,set_fail,7); //顯示密碼錯誤
}
}
}
/****
******** 密碼處理函數
******* 說明：user為用戶名
*****/
void password_deal(uchar user)
{
ulong T_money;
while(1)
{
// 1.讀入密碼,做成判斷
switch(user)
{
case 1:
I2C_read_buf(PASSWORD_ADD,(uchar*)&password1,sizeof(PASSWORD)); //卡1
T_money=password1.money;
if(password_check(buf,password1.codes))
password_flag=0; //密碼錯誤
else
password_flag=1; //密碼正確
break;
case 2:
I2C_read_buf(PASSWORD_ADD1,(uchar*)&password2,sizeof(PASSWORD)); //卡2
T_money=password2.money;
if(password_check(buf,password2.codes))
password_flag=0; //密碼錯誤
else
password_flag=1; //密碼正確
break;
case 3:
I2C_read_buf(PASSWORD_ADD2,(uchar*)&password3,sizeof(PASSWORD)); //卡3
T_money=password3.money;
if(password_check(buf,password3.codes))
password_flag=0; //密碼錯誤
else
password_flag=1; //密碼正確
break;
case 4:
I2C_read_buf(PASSWORD_ADD3,(uchar*)&password4,sizeof(PASSWORD)); //卡4
T_money=password4.money;
if(password_check(buf,password4.codes))
password_flag=0; //密碼錯誤
else
password_flag=1; //密碼正確
break;
default: break;
}
if(password_flag==0) //密碼錯誤跳出while
{
lcd_clear_scr();
lcd_hanzi_str(2,2,mimacuowu,4); //顯示密碼錯誤
delay(1500);
break;
}
lcd_clear_scr();
lcd_hanzi_str(0,0,cunkuan,2); //顯示
lcd_hanzi_str(0,4,chaxunyue,4);
lcd_hanzi_str(3,0,qukuan,2);
lcd_hanzi_str(3,4,xiugaimima,4);
// 根據按鍵選擇操作的種類
while( (k5==1)&&(k6==1)&&(k7==1)&&(k8==1) )
{
if(key_leave==0)
{
buzzer();
soft_reset();
}
}
buzzer();
while(1)
{
if(key_leave==0)
{
delay(2);
if(key_leave==0)
{
while(!key_leave);
break;
}
}
if(k5==0)
{
delay(2);
if(k5==0)
{
while(!k5);
deal_flag=1; //查詢余量
}
}
if(k6==0)
{
delay(2);
if(k6==0)
{
while(!k6);
deal_flag=2; //修改密碼
}
}
if(k7==0)
{
delay(2);
if(k7==0)
{
while(!k7);
deal_flag=3; //取
}
}
if(k8==0)
{
delay(2);
if(k8==0)
{
while(!k8);
deal_flag=4; //存
}
}
lcd_clear_scr();
/**************具體用戶具體操作******************/
switch(user) //判斷用戶
{
case 1: //卡1
{
if(deal_flag==1) //查詢余量
{
display(T_money);
}
if(deal_flag==2) //修改密碼
{
input_new_password(1) ;
}
if(deal_flag==3) //取
{
Qukuan(1);
}
if(deal_flag==4) //存
{
Cunkuan(1 );
}
}
break;
case 2: //卡2
{
if(deal_flag==1) //查詢余量
{
display(T_money);
}
if(deal_flag==2) //修改密碼
{
input_new_password(2) ;
}
if(deal_flag==3) //取
{
Qukuan(2);
}
if(deal_flag==4) //存
{
Cunkuan(2 );
}
}
break;
case 3: //卡2
{
if(deal_flag==1) //查詢余量
{
display(T_money);
}
if(deal_flag==2) //修改密碼
{
input_new_password(3) ;
}
if(deal_flag==3) //取
{
Qukuan(3);
}
if(deal_flag==4) //存
{
Cunkuan(3);
}
}
break;
case 4: //卡2
{
if(deal_flag==1) //查詢余量
{
display(T_money);
}
if(deal_flag==2) //修改密碼
{
input_new_password(4) ;
}
if(deal_flag==3) //取
{
Qukuan(4);
}
if(deal_flag==4) //存
{
Cunkuan(4);
}
}
break;
default :break;
}
}
}
}
void main()
{
/*******改變這里可以改變初始密碼值**************/
set_eeprom_init(); //不要每次都開啟這條語句，不然你設了的新密碼沒用
lcd_init();
lcd_clear_scr();
lcd_hanzi_str(0,2,hy,4);
lcd_hanzi_str(1,1,china_bank,6);
lcd_hanzi_str(3,2,qingcharukapian,6);
//////while///////////////////
// 1.插入卡片
while( (k1!=0)&&(k2!=0)&&(k3!=0)&&(k4!=0) );
buzzer();
lcd_clear_scr();
// 2判斷卡
if(k1==0)
{
delay(2);
if(k1==0)
{
ka_flag=1; //卡1
}
}
if(k2==0)
{
delay(2);
if(k2==0)
{
ka_flag=2; //卡2
}
}
if(k3==0)
{
delay(2);
if(k3==0)
{
ka_flag=4; //卡3
}
}
if(k4==0)
{
delay(2);
if(k4==0)
{
ka_flag=4; //卡4
}
}
// 3.輸入密碼
password_input(buf);
// 4判斷密碼
switch(ka_flag)
{
case 1:
password_deal(1);break;
case 2:
password_deal(2);break;
case 3:
password_deal(3);break;
case 4:
password_deal(4);break;
}
}

復制代碼

欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136