奇米777第四在线,国产区精品福利在线社区,最新的国产精品免费完整版

#include "gokit.h"
int a=0;
int b=0;
u8 wtadd=0;
int h;
int q;
int g;
/*Global Variable*/
uint32_t ReportTimeCount = 0;
uint8_t gaterSensorFlag = 0;
uint8_t Set_LedStatus = 0;
uint8_t NetConfigureFlag = 0;
uint8_t curTem = 0, curHum = 0;
uint8_t lastTem = 0,lastHum = 0;
extern RingBuffer u_ring_buff;
uint8_t p0Flag = 0;
WirteTypeDef_t WirteTypeDef;
ReadTypeDef_t ReadTypeDef;
extern uint8_t benday; //???
extern uint8_t benDhour;//?
extern uint8_t benminute;//?
extern uint8_t bensecond;//?
extern uint8_t getTime[9];
extern uint8_t XIEDate;
extern uint8_t XIEHour;
extern uint8_t XIEMin;
extern uint8_t XIEsecond;
extern unsigned char time[7],Tmp[20],temp,Flag8563_2402;
extern uint8_t Month;
extern uint8_t Date;
extern uint8_t Hour;
extern uint8_t Min;
extern uint8_t second;
uint8_t CENCHU_A;
uint8_t CENCHU_B;
uint8_t CENCHU_C;
uint8_t CENCHU_D;
uint8_t ZAOSHI;
uint8_t ZAOFEN;
uint8_t ZHONGSHI;
uint8_t ZHONGFEN;
uint8_t WANSHI;
uint8_t WANFEN;
uint16_t cx=0, cxx=0,cxxx=0;
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
uint8_t p0_control_buf[MAX_P0_LEN],frist;
uint16_t cxx=0,cxxx=0;
// uint8_t frist[2] ;
SystemInit();
HW_Init();
Printf_SystemRccClocks();
SW_Init();
// Time_Disposal ();
//PCF8563_set(0x10,0x07,XIEDate,XIEHour,XIEMin,XIEsecond,0x05);//，年、月、日、時、分、秒、星期。BCD碼表示
Flag8563_2402=0;
IIC_ReadBuf(0,Tmp,16);
Flag8563_2402=111;
IIC_ReadBuf(2,&frist,1);// 判斷是否第一次啟動8563
if((frist&0x20)!=0)
{
PCF8563_set(0x16,0x07,0x14,XIEHour,XIEMin,XIEsecond,0x05);
}
while(1)
{
if(++cxxx==60000)
{
if(++cx>>3)
{
Pro_UART_SendBuf(getTime,9,1);
Flag8563_2402=WR8563;
PCF8563_read(time);
Ben_AckHandle();
printf("\r\nEEPROM: %d %d %d %d %d %d %d %d %d %d %d %d %d \r\n",Tmp[0],Tmp[1],Tmp[2],Tmp[3],Tmp[4],Tmp[5],Tmp[6],Tmp[7],Tmp[8],Tmp[9],Tmp[10],Tmp[11],Tmp[12]);
printf("\r\nTime: %s %d %d :%d:%d\r\n","下位機--時間",benday,benDhour,benminute,bensecond);
printf("\r\nTime: %s %d-%d %d:%d:%d \r\n","云端----時間",Month,Date,Hour,Min,second);
}
if(wtadd==0)
{
if((GPIO_ReadInputDataBit(GPIO_WT588BY_PORT,GPIO_Pin_1)))
{
Send_oneline( 0 );
++wtadd;
}
}
if((Tmp[5] == benDhour && Tmp[6] == benminute&&(bensecond<5)) || (Tmp[7] == benDhour && Tmp[8] == benminute&&(bensecond<5)) || (Tmp[9] == benDhour && Tmp[10] == benminute&&(bensecond<5)))
{
if(benDhour==0)////bug
{
if(benminute==0)
{}
else
luoyao(Tmp[1],Tmp[2],Tmp[3],Tmp[4]);
}
if(benDhour!=0)
{
if(benminute!=0)
luoyao(Tmp[1],Tmp[2],Tmp[3],Tmp[4]);
}
}
}
if(cxx==1)
{
cxx=0;
printf("開始寫入數據");
Flag8563_2402=WR2402;
Tmp[1]= CENCHU_A;Tmp[2]=CENCHU_B;Tmp[3]=CENCHU_C;Tmp[4]=CENCHU_D;
Tmp[5]= ZAOSHI;Tmp[6]=ZAOFEN;Tmp[7]=ZHONGSHI;Tmp[8]=ZHONGFEN;
Tmp[9]= WANSHI;Tmp[10]=WANFEN;Tmp[11]=CENCHU_C;Tmp[12]=CENCHU_D;
IIC_WriteBuf(0,Tmp,16);
IIC_ReadBuf(0,Tmp,16);
printf("\r\nEEPROM: %d %d %d %d %d %d %d %d %d %d %d %d %d \r\n",Tmp[0],Tmp[1],Tmp[2],Tmp[3],Tmp[4],Tmp[5],Tmp[6],Tmp[7],Tmp[8],Tmp[9],Tmp[10],Tmp[11],Tmp[12]);
Flag8563_2402=WR8563;
}
KEY_Handle();
GizWits_MessageHandle(p0_control_buf, sizeof(WirteTypeDef_t));
if(p0Flag == 1)
{
memcpy((uint8_t *)&WirteTypeDef, p0_control_buf, sizeof(WirteTypeDef_t));
GizWits_ControlDeviceHandle();
GizWits_DevStatusUpgrade((uint8_t *)&ReadTypeDef, 10*60*1000, 1);
p0Flag =0;
}
if(gaterSensorFlag != 0)
{
GizWits_GatherSensorData();
gaterSensorFlag = 0;
}
GizWits_DevStatusUpgrade((uint8_t *)&ReadTypeDef, 10*60*1000, 0);
}
}
/** @addtogroup GizWits_HW_Init
* @{
*/
void HW_Init(void)
{
Delay_Init(72);
UARTx_Init();
// RGB_KEY_GPIO_Init();
RGB_LED_Init();
LED_GPIO_Init();
KEY_GPIO_Init();
TIM3_Int_Init(7199,9); //ms interrupt
// Motor_Init();
DHT11_Init();
IR_Init();
EXTIX_Init();
}
/** @addtogroup GizWits_SW_Init
* @{
*/
void SW_Init()
{
ReadTypeDef.Alert = 0;
ReadTypeDef.LED_Cmd = 0;
ReadTypeDef.Infrared = 0;
ReadTypeDef.SetA_YAO=0;
ReadTypeDef.SetB_YAO=0;
ReadTypeDef.SetC_YAO=0 ;
ReadTypeDef.SetD_YAO=0;
ReadTypeDef.ZAO_SHI=0;
ReadTypeDef.ZAO_FEN=0;
ReadTypeDef.SetZHONG_SHI=0 ;
ReadTypeDef.SetZHONG_FEN=0;
ReadTypeDef.SetWAN_SHI=0;
ReadTypeDef.SetWAN_FEN=0;
ReadTypeDef.Temperature = 0;
ReadTypeDef.Humidity = 0;
ReadTypeDef.Alert = 0;
ReadTypeDef.Fault = 0;
GizWits_init(sizeof(ReadTypeDef_t));
printf("Gokit Init Ok ...\r\n");
}
/** @addtogroup Printf_SystemRccClocks
* @{
*/
void Printf_SystemRccClocks(void)
{
uint8_t SYSCLKSource;
RCC_ClocksTypeDef SystemRCC_Clocks;
printf("System start...\r\n");
SYSCLKSource = RCC_GetSYSCLKSource();
if(SYSCLKSource==0x04)
printf("SYSCLKSource is HSE\r\n");
else if(SYSCLKSource==0x00)
printf("SYSCLKSource is HSI\r\n");
else if(SYSCLKSource==0x08)
printf("SYSCLKSource is PL!\r\n");
RCC_GetClocksFreq(&SystemRCC_Clocks);
printf("SYS clock =%dMHz \r\n",(uint32_t)SystemRCC_Clocks.SYSCLK_Frequency/1000000);
printf("HCLK clock =%dMHz \r\n",(uint32_t)SystemRCC_Clocks.HCLK_Frequency/1000000);
printf("PCLK1 clock =%dMHz \r\n",(uint32_t)SystemRCC_Clocks.PCLK1_Frequency/1000000);
printf("PCLK2_clock =%dMHz \r\n",(uint32_t)SystemRCC_Clocks.PCLK2_Frequency/1000000);
printf("SADCCLK_Frequencyclock =%dMHz \r\n",(uint32_t)SystemRCC_Clocks.ADCCLK_Frequency/1000000);
}
/*******************************************************************************
* Function Name : GizWits_ControlDeviceHandle
* Description : Analy P0 Package
* Input : None
* Output : None
* Return : Bit , Attr_Flags
* Attention :
*******************************************************************************/
void GizWits_ControlDeviceHandle()
{
if( ((WirteTypeDef.Attr_Flags>>8) & 1) == 1)
{
if(Set_LedStatus != 1)
{
if(WirteTypeDef.LED_Cmd == LED_OnOff)
{
printf("\r\nEEPROM: %d %d %d %d %d %d %d %d %d %d %d %d %d \r\n",Tmp[0],Tmp[1],Tmp[2],Tmp[3],Tmp[4],Tmp[5],Tmp[6],Tmp[7],Tmp[8],Tmp[9],Tmp[10],Tmp[11],Tmp[12]);
printf("\r\nTime: %s %d %d :%d:%d\r\n","下位機--時間",benday,benDhour,benminute,bensecond);
printf("\r\nTime: %s %d-%d %d:%d:%d \r\n","云端----時間",Month,Date,Hour,Min,second);
LED_RGB_Control(0,0,0);
ReadTypeDef.LED_Cmd = LED_OnOff;
printf("SetLED_Off \r\n");
}
if(WirteTypeDef.LED_Cmd == LED_OnOn)
{
ReadTypeDef.LED_Cmd = LED_OnOn;
Flag8563_2402=WR8563;
cxx=1;
Time_Disposal();
PCF8563_set(0x10,0x07,XIEDate,XIEHour,XIEMin,XIEsecond,0x05);//設置時間，年、月、日、時、分、秒、星期。BCD碼表示
PCF8563_read(time);
Ben_AckHandle();
if(cxx==1)
{
cxx=0;
printf("開始寫入數據");
Flag8563_2402=0;
Tmp[1]= CENCHU_A;Tmp[2]=CENCHU_B;Tmp[3]=CENCHU_C;Tmp[4]=CENCHU_D;
Tmp[5]= ZAOSHI;Tmp[6]=ZAOFEN;Tmp[7]=ZHONGSHI;Tmp[8]=ZHONGFEN;
Tmp[9]= WANSHI;Tmp[10]=WANFEN;Tmp[11]=CENCHU_C;Tmp[12]=CENCHU_D;
IIC_WriteBuf(0,Tmp,16);
IIC_ReadBuf(0,Tmp,16);
printf("\r\nEEPROM: %d %d %d %d %d %d %d %d %d %d %d %d %d \r\n",Tmp[0],Tmp[1],Tmp[2],Tmp[3],Tmp[4],Tmp[5],Tmp[6],Tmp[7],Tmp[8],Tmp[9],Tmp[10],Tmp[11],Tmp[12]);
}
printf("\r\nTime: %s %d %d :%d:%d\r\n","下位機--時間",benday,benDhour,benminute,bensecond);
printf("\r\nTime: %s %d-%d %d:%d:%d \r\n","云端----時間",Month,Date,Hour,Min,second);
ReadTypeDef.LED_Cmd = LED_OnOn;
LED_RGB_Control(254,0,0);
printf("SetLED_On \r\n");
if((GPIO_ReadInputDataBit(GPIO_WT588BY_PORT,GPIO_Pin_1)))
{
Send_oneline(1);
}
}
}
}
if( ((WirteTypeDef.Attr_Flags>>9) & 1) == 1)
{ printf("開始輸入A藥數據");
ReadTypeDef.SetA_YAO= WirteTypeDef.SetA_YAO;
CENCHU_A= WirteTypeDef.SetA_YAO;
printf("輸入的a藥數據為%d 不要忘記寫入哦",CENCHU_A);
}
if( ((WirteTypeDef.Attr_Flags>>10) & 1) == 1)
{ printf("開始輸入B藥數據");
ReadTypeDef.SetB_YAO= WirteTypeDef.SetB_YAO;
CENCHU_B= WirteTypeDef.SetB_YAO;
printf("輸入的B要數據%d 不要忘記寫入哦",CENCHU_B);
}
if( ((WirteTypeDef.Attr_Flags>>11) & 1) == 1)
{ printf("開始輸入C藥數據");
ReadTypeDef.SetC_YAO= WirteTypeDef.SetC_YAO;
CENCHU_C = WirteTypeDef.SetC_YAO;
printf("輸入的C要數據%d 不要忘記寫入哦",CENCHU_C);
}
if( ((WirteTypeDef.Attr_Flags>>12) & 1) == 1)
{
ReadTypeDef.ZAO_SHI= WirteTypeDef.ZAO_SHI;
ZAOSHI= WirteTypeDef.ZAO_SHI;
printf("輸入早晨小時為%d 不要忘記寫入哦",ZAOSHI);
}
if( ((WirteTypeDef.Attr_Flags>>13) & 1) == 1)
{
ReadTypeDef.ZAO_FEN= WirteTypeDef.ZAO_FEN;
ZAOFEN= WirteTypeDef.ZAO_FEN;
printf("輸入早晨分鐘%d 不要忘記寫入哦",ZAOFEN);
}
if( ((WirteTypeDef.Attr_Flags>>14) & 1) == 1)
{
ReadTypeDef.SetZHONG_SHI= WirteTypeDef.SetZHONG_SHI;
ZHONGSHI= WirteTypeDef.SetZHONG_SHI;
printf("輸入SHANGWU時為%d 不要忘記寫入哦",ZHONGSHI);
}
if( ((WirteTypeDef.Attr_Flags>>15) & 1) == 1)
{
ReadTypeDef.SetZHONG_FEN= WirteTypeDef.SetZHONG_FEN;
ZHONGFEN= WirteTypeDef.SetZHONG_FEN;
printf("輸入SHANGWU分鐘%d 不要忘記寫入哦",ZHONGFEN);
}
if( ((WirteTypeDef.Attr_Flags>>0) & 1) == 1)
{
ReadTypeDef.SetWAN_SHI= WirteTypeDef.SetWAN_SHI;
WANSHI= WirteTypeDef.SetWAN_SHI;
printf("晚上的小時%d 不要忘記寫入哦",WANSHI);
}
if( ((WirteTypeDef.Attr_Flags>>1) & 1) == 1)
{
ReadTypeDef.SetWAN_FEN= WirteTypeDef.SetWAN_FEN;
WANFEN= WirteTypeDef.SetWAN_FEN;
printf("晚上的分鐘%d 不要忘記寫入哦",WANFEN);
}
if( ((WirteTypeDef.Attr_Flags>>2) & 1) == 1)
{
ReadTypeDef.SetD_YAO= WirteTypeDef.SetD_YAO;
CENCHU_D= WirteTypeDef.SetD_YAO;
printf("輸入D藥數據時為%d 不要忘記寫入哦",CENCHU_D);
}
}

復制代碼

欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136