欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136

標題: VS-RK3399 Android 系統串dts配置介紹資料 [打印本頁]

作者: shizhuang 時間: 2021-12-7 15:31
標題: VS-RK3399 Android 系統串dts配置介紹資料

RK3399-UART功能特點
1、UART （Universal Asynchronous Receiver/Transmitter），以下是linux 4.4 uart驅動支持的一些特性︰
 最高支持4M波特率
 只有UART0和UART3支持硬件自動流控
 支持中斷傳輸模式

2、 DTS節點配置
使能，無需其他配置： &uart0 { status = "okay"; }; 使能后/dev/ttyS0 設備就可以使用。

3、關閉Linux串口打印
3.1 關掉FIQ debugger，Disable以下節點
fiq_debugger: fiq-debugger {
compatible = "rockchip,fiq-debugger";
rockchip,serial-id = <2>; 設置串口id
rockchip,signal-irq = <182>;
rockchip,wake-irq = <0>;
rockchip,irq-mode-enable = <1>; /* If enable uart uses irq instead of fiq */
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
pinctrl-names = "default";
pinctrl-0 = <&uart2c_xfer>; 配置iomux
status = “disabled”;
}

3.2 去掉earlyprintk=uart8250-32bit,0xff690000
chosen {
bootargs = "earlyprintk=uart8250-32bit,0xff690000";
};
3.3 在燒寫parameter.txt
commandline：androidboot.console=ttyFIQ0，去掉ttyFIQ0。

3.4 android/device/rockchip/common/recovery/etc/init.rc
service recovery /sbin/recovery
#console 這個注釋掉
seclabel u:r:recovery:s0

4 打印串口2改為其他串口
fiq_debugger: fiq-debugger {
compatible = "rockchip,fiq-debugger";
rockchip,serial-id = <2>; 設置串口id
rockchip,signal-irq = <182>;
rockchip,wake-irq = <0>;
rockchip,irq-mode-enable = <1>; /* If enable uart uses irq instead of fiq */
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
pinctrl-names = "default";
pinctrl-0 = <&uart2c_xfer>; 配置iomux
};
chosen {
bootargs = "earlyprintk=uart8250-32bit,0xff690000"; 新串口的地址
};

以上所需信息都可以，通過串口設備的DTS節點獲取，舉個例子：
uart1: serial@ff190000 {
compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
reg = <0x0 0xff190000 0x0 0x100>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dmac_peri 2>, <&dmac_peri 3>;
dma-names = "tx", "rx";
reg-shift = <2>; reg-io-width = <4>;
pinctrl-names = "default";
/*pinctrl-0 = <&uart1_xfer>;*/
status = "disabled";
};

歡迎光臨 (http://www.raoushi.com/bbs/)