免费色人啪啪爱视频,中文字幕亚洲无线码在线一区,国产三级视频在线

/*申明一下部分代碼是來自于網絡的整合我自己做了一些修改更加完善取之于網絡用之于網絡 */
/*按鍵隊列執行函數*/
void task_run_key(void)
{
KeyValue_Info KeyValueInfo;
unsigned char len = 0;
if(Read_RingStrEx(&Key_Value,(unsigned char *)&KeyValueInfo,&len) == 0)
{
if(len != sizeof(KeyValue_Info))
{
return;
}
if(KeyValueInfo.KeyGpNum < KeyGPCnt && KeyGpInfo[KeyValueInfo.KeyGpNum].KeyGPRun != NULL)
{
KeyGpInfo[KeyValueInfo.KeyGpNum].KeyGPRun();
}
else if(KeyValueInfo.KeyNum < KeyCnt)
{
if(KeyValueInfo.KeyStatus == SP && KeyInfo[KeyValueInfo.KeyNum].KeySPRun != NULL)
{
KeyInfo[KeyValueInfo.KeyNum].KeySPRun();
}
else if(KeyValueInfo.KeyStatus == LP && KeyInfo[KeyValueInfo.KeyNum].KeyLPRun != NULL)
{
KeyInfo[KeyValueInfo.KeyNum].KeyLPRun();
}
else if(KeyValueInfo.KeyStatus == LOOP && KeyInfo[KeyValueInfo.KeyNum].KeyLOOPRun != NULL)
{
KeyInfo[KeyValueInfo.KeyNum].KeyLOOPRun();
}
}
}
}
//監聽函數 --放在1ms循環里面執行
void task_listen_key(void)
{
unsigned char i;
KeyValue_Info KeyValueInfo;
//單鍵檢測
for(i = 0; i < KeyCnt;i++)
{
if(KeyInfo[i].useFlg == KEY_USE)
{
CheckKey((Key_Num)i,KeyInfo[i].mode);
}
if(Get_keyValueX[i] == KEY_ON && Get_keyValue[i] == KEY_OFF && KeyGPFlag[i] == 0)
{
if(KeyInfo[i].mode == KEY_CLOCK)
{
#if DEBUG_PRINTF
//printf("非連發模式：key%d按鍵已松開,鍵入時間為%dMs\r\n",(unsigned char)i+1,Get_keyChooseTimeCnt[i]);
#endif
//短按
if((Get_keyChooseTimeCnt[i] != 0) && (Get_keyChooseTimeCnt[i] < LP_TIME) && (Get_keyChooseTimeCnt[i] >= SP_TIME))
{
KeyValueInfo.KeyNum = (Key_Num)i;
KeyValueInfo.KeyGpNum = (KeyGroup_Num)KeyGPCnt;
KeyValueInfo.KeyStatus = SP;
Write_RingStr(&Key_Value,(unsigned char *)&KeyValueInfo,sizeof(KeyValueInfo));
}
//長按
else if((Get_keyChooseTimeCnt[i] != 0) && (Get_keyChooseTimeCnt[i] >= LP_TIME))
{
KeyValueInfo.KeyNum = (Key_Num)i;
KeyValueInfo.KeyGpNum = (KeyGroup_Num)KeyGPCnt;
KeyValueInfo.KeyStatus = LP;
Write_RingStr(&Key_Value,(unsigned char *)&KeyValueInfo,sizeof(KeyValue_Info));
}
}
else if (KeyInfo[i].mode == KEY_NOCLOCK)
{
#if DEBUG_PRINTF
//printf("連發模式：key%d按鍵鍵入時間為%dMs 自動連發時間：%dMs\r\n",(unsigned char)i+1,Get_keyChooseTimeCnt[i],KeyInfo[i].AutoTime);
#endif
if(Get_keyChooseTimeCnt[i] != 0)
{
KeyValueInfo.KeyNum = (Key_Num)i;
KeyValueInfo.KeyGpNum = (KeyGroup_Num)KeyGPCnt;
KeyValueInfo.KeyStatus = LOOP;
Write_RingStr(&Key_Value,(unsigned char *)&KeyValueInfo,sizeof(KeyValue_Info));
}
}
Get_keyChooseTimeCnt[i] = 0;
}
Get_keyValueX[i] = Get_keyValue[i];
}
//組合檢測
for(i = 0; i < KeyGPCnt;i++)
{
if(KeyGpInfo[i].useFlg == KEYGP_USE)
{
if(KeyGpInfo[i].GetKeyNumStrict == KEYSTRICT_OFF)
CheckKeyGP_NoStrict((KeyGroup_Num)i,KeyGpInfo[i]);
else if(KeyGpInfo[i].GetKeyNumStrict == KEYSTRICT_ON)
CheckKeyGP_Strict((KeyGroup_Num)i,KeyGpInfo[i]);
}
if(Get_keyGPStatusX[i] == KEYGP_OFF && Get_keyGPStatus[i] == KEYGP_ON)
{
#if DEBUG_PRINTF
//printf("組合 %d已觸發\r\n",(unsigned char)i+1);
#endif
KeyValueInfo.KeyNum = (Key_Num)KeyCnt;
KeyValueInfo.KeyGpNum = (KeyGroup_Num)i;
KeyValueInfo.KeyStatus = 0xFF;
Write_RingStr(&Key_Value,(unsigned char *)&KeyValueInfo,sizeof(KeyValue_Info));
//完成一次組合，重置鍵值。
KeyGPStatusValueNow[i] = 0;
}
Get_keyGPStatusX[i] = Get_keyGPStatus[i];
}
}
/* TIM1 init PWM function */
void MX_TIM1_Init(void)
{
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
TIM_MasterConfigTypeDef sMasterConfig = {0};
TIM_OC_InitTypeDef sConfigOC = {0};
TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
htim1.Instance = TIM1;
htim1.Init.Prescaler = 60-1;
htim1.Init.CounterMode = TIM_COUNTERMODE_CENTERALIGNED2;
htim1.Init.Period = 1000;
htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim1.Init.RepetitionCounter = 0;
htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
{
Error_Handler();
}
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_Init(&htim1) != HAL_OK)
{
Error_Handler();
}
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
{
Error_Handler();
}
sConfigOC.OCMode = TIM_OCMODE_PWM1;
sConfigOC.Pulse = 500;
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
{
Error_Handler();
}
sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
sBreakDeadTimeConfig.DeadTime = 0;
sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
{
Error_Handler();
}
HAL_TIM_MspPostInit(&htim1);
}

復制代碼

欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136