欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136

標題: 4KW LLC教程教學數字開關電源 LLC設計步驟，關鍵元器件計算書 [打印本頁]

作者: shuisheng88 時間: 2020-8-8 15:14
標題: 4KW LLC教程教學數字開關電源 LLC設計步驟，關鍵元器件計算書

4KW LLC教程教學數字開關電源、 LLC設計步驟、關鍵元器件計算書、全過程就是逐步指導 變壓器詳細設計資料原理圖和pcblayout
資料文件太多分成3個壓縮包

//###########################################################################
//
// FILE: Example_2803xAdcSoc.c
//
// TITLE:  ADC Start of Conversion example
//
//! \addtogroup f2803x_example_list
//! <h1> ADC Start of Conversion (adc_soc)</h1>
//!
//! This ADC example uses ePWM1 to generate a periodic ADC SOC - ADCINT1.
//! Two channels are converted, ADCINA4 and ADCINA2.
//!
//! \b Watch \b Variables \n
//! - Voltage1[10] - Last 10 ADCRESULT0 values
//! - Voltage2[10] - Last 10 ADCRESULT1 values
//! - ConversionCount - Current result number 0-9
//! - LoopCount    - Idle loop counter
//
//
//###########################################################################
// $TI Release: F2803x Support Library v2.01.00.00 $
// $Release Date: Mon May 22 15:41:40 CDT 2017 $
// $Copyright:
// Copyright (C) 2009-2017 Texas Instruments Incorporated - wwwticom
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// $
//###########################################################################

//
// Included Files
//
#include "DSP28x_Project.h"    // Device Headerfile and Examples Include File
#include "ISR_50kHz.h"
#include <string.h>
#include <stdint.h>
//
// Function Prototypes
//
__interrupt void adc_isr(void);

void Adc_Config(void);
void EPWM1and2_Init(void);//LLC driver  may be used in interleaving LLC
void EPWM3_Init(void);//50kHz AD_ISR triggle
void EPWM4_Init(void);//50kHz AD_ISR triggle
void EPWM5_Init(void);//DAC0 and DAC1
void ADC_Init(void);//ADC init
void GPIO_Init(void);

Uint16 LoopCount;
Uint16 ConversionCount;
Uint16 Voltage1[10];
Uint16 Voltage2[10];

extern Uint16 RamfuncsLoadStart;
extern Uint16 RamfuncsLoadSize;
extern Uint16 RamfuncsRunStart;

void MemCopy(Uint16 *SourceAddr, Uint16* SourceEndAddr, Uint16* DestAddr)
{
while(SourceAddr < SourceEndAddr)
{
   *DestAddr++ = *SourceAddr++;
}
return;
}

//
// Main
//
void main(void)
{

InitSysCtrl();

DINT;

InitPieCtrl();

IER = 0x0000;
IFR = 0x0000;

EALLOW;
      InitPieVectTable();

   EDIS;

EALLOW;          // This is needed to write to EALLOW protected register
PieVectTable.EPWM4_INT = &adc_isr;
EDIS; // This is needed to disable write to EALLOW protected registers

memcpy((uint16_t *)&RamfuncsRunStart,(uint16_t *)&RamfuncsLoadStart,
         (unsigned long)&RamfuncsLoadSize);

GPIO_Init();
InitFlash();
InitSciGpio();

InitAdc();  // For this example, init the ADC
AdcOffsetSelfCal();

EALLOW;
SysCtrlRegs.PCLKCR0.bit.TBCLKSYNC = 1;    // enable TBCLK within the ePWM

EDIS;

IER |= M_INT3;                   // Enable CPU Interrupt 1
IER |= M_INT9;                   // Enable CPU Interrupt 9

// PieCtrlRegs.PIEIER1.bit.INTx1 = 1; // Enable INT 1.1 in the PIE
PieCtrlRegs.PIEIER3.bit.INTx4 = 1;//enable EPWM4 INterrput
PieCtrlRegs.PIEIER9.bit.INTx1=1;// Enable INT 9.1 in the PIE SCIRX interrupt

EINT;                            // Enable Global interrupt INTM
ERTM;                            // Enable Global realtime interrupt DBGM

EPWM1and2_Init();
         EPWM3_Init();
         EPWM4_Init();
         EPWM5_Init();
         ADC_Init();

   ID2DCalValueInit();
   ID2DTime100us.TimebaseDebug1minCnt=0;
   ID2DTime100us.TimebaseStateMachine5msCnt=0;

for(;;)
{
      if(ISR_10KHzCnt>=4)
         {
         ISR_10KHzCnt=0;
            ISR_10kHz();
         }
}
}

void EPWM1and2_Init(void)
{
EALLOW;
// EPWM Module 1 config
EPwm1Regs.TBPRD = 600; // Period = 300 TBCLK counts  60M/100k=600
EPwm1Regs.TBPHS.half.TBPHS = 0; // Set Phase register to zero
EPwm1Regs.TBCTL.bit.CTRMODE = TB_COUNT_UP; // Symmetrical mode
EPwm1Regs.TBCTL.bit.PHSEN = TB_DISABLE; // Master module
EPwm1Regs.TBCTL.bit.PRDLD = TB_SHADOW;
EPwm1Regs.TBCTL.bit.SYNCOSEL = TB_CTR_ZERO; // Sync down-stream module
EPwm1Regs.TBCTL.bit.SYNCOSEL = TB_SYNC_DISABLE; // Sync down-stream module
EPwm1Regs.TBCTL.bit.CLKDIV=TB_DIV1;
EPwm1Regs.TBCTL.bit.HSPCLKDIV=TB_DIV1;
EPwm1Regs.CMPCTL.bit.SHDWAMODE = CC_SHADOW;
EPwm1Regs.CMPCTL.bit.SHDWBMODE = CC_SHADOW;
EPwm1Regs.CMPCTL.bit.LOADAMODE = CC_CTR_PRD; // load on CTR=Zero
EPwm1Regs.CMPCTL.bit.LOADBMODE = CC_CTR_PRD; // load on CTR=Zero
EPwm1Regs.AQCTLA.bit.ZRO = AQ_SET; // set actions for EPWM1A
EPwm1Regs.AQCTLA.bit.CAU = AQ_CLEAR;
EPwm1Regs.DBCTL.bit.OUT_MODE = DB_FULL_ENABLE; // enable Dead-band module  DBA_ALL
EPwm1Regs.DBCTL.bit.POLSEL = DB_ACTV_HIC; // Active Hi complementary
EPwm1Regs.DBFED = 270; // FED = 270 TBCLKs
EPwm1Regs.DBRED = 270; // RED = 270 TBCLKs

// EPwm1Regs.ETSEL.bit.SOCAEN  = 1; // Enable SOC on A group

// EPwm1Regs.ETSEL.bit.SOCASEL = ET_CTR_ZERO; // Select SOC from from zero on upcount
// EPwm1Regs.ETPS.bit.SOCAPRD  = 1; // Generate pulse on 1st event

EPwm1Regs.TZSEL.bit.OSHT1=1;//TZ1 will be one shot signal for EPWM1
EPwm2Regs.TZSEL.bit.OSHT1=1;//TZ1 will be one shot signal for EPWM2
EPwm1Regs.TZSEL.bit.OSHT2=1;//TZ2 will be one shot signal for EPWM1
EPwm2Regs.TZSEL.bit.OSHT2=1;//TZ2 will be one shot signal for EPWM2
EPwm1Regs.TZSEL.bit.OSHT3=1;//TZ3 will be one shot signal for EPWM1
EPwm2Regs.TZSEL.bit.OSHT3=1;//TZ3 will be one shot signal for EPWM2

EPwm1Regs.TZCTL.bit.TZA=2;//TZ will Force EPWM1A to a low state
EPwm1Regs.TZCTL.bit.TZB=2;//TZ will Force EPWM1B to a low state
EPwm2Regs.TZCTL.bit.TZA=2;//TZ will Force EPWM2A to a low state
EPwm2Regs.TZCTL.bit.TZB=2;//TZ will Force EPWM2B to a low state
// EPWM Module 2 config
EPwm2Regs.TBPRD = 600; // Period = 600 TBCLK counts
EPwm2Regs.TBPHS.half.TBPHS = 150; // Phase = 150/600 * 360 = 90 deg
EPwm2Regs.TBCTL.bit.CTRMODE = TB_COUNT_UP; // Symmetrical mode
EPwm2Regs.TBCTL.bit.PHSEN = TB_ENABLE; // Slave module
EPwm2Regs.TBCTL.bit.PHSDIR = TB_DOWN; // Count DOWN on sync (=90 deg)
EPwm2Regs.TBCTL.bit.PRDLD = TB_SHADOW;
EPwm2Regs.TBCTL.bit.SYNCOSEL = TB_SYNC_IN; // sync flow-through

EPwm2Regs.TBCTL.bit.CLKDIV=TB_DIV1;
EPwm2Regs.TBCTL.bit.HSPCLKDIV=TB_DIV1;
EPwm2Regs.CMPCTL.bit.SHDWAMODE = CC_SHADOW;
EPwm2Regs.CMPCTL.bit.SHDWBMODE = CC_SHADOW;
EPwm2Regs.CMPCTL.bit.LOADAMODE = CC_CTR_ZERO; // load on CTR=Zero
EPwm2Regs.CMPCTL.bit.LOADBMODE = CC_CTR_ZERO; // load on CTR=Zero
EPwm2Regs.AQCTLA.bit.ZRO = AQ_SET; // set actions for EPWM2A
EPwm2Regs.AQCTLA.bit.CAU = AQ_CLEAR;
EPwm2Regs.DBCTL.bit.OUT_MODE = DB_FULL_ENABLE; // enable Dead-band module
EPwm2Regs.DBCTL.bit.POLSEL = DB_ACTV_HIC; // Active Hi Complementary
EPwm2Regs.DBFED = 270; // FED = 20 TBCLKs
EPwm2Regs.DBRED = 270; // RED = 20 TBCLKs

EDIS;

}

void EPWM3_Init(void)
{
//
      // Assumes ePWM3 clock is already enabled in InitSysCtrl();
      //
EALLOW;
      EPwm3Regs.TBPHS.half.TBPHS = 0; // Phase = 150/600 * 360 = 90 deg
      EPwm3Regs.TBCTL.bit.CTRMODE = TB_COUNT_UP; // Symmetrical mode
      EPwm3Regs.TBCTL.bit.PHSEN = TB_ENABLE; // Slave module
      EPwm3Regs.TBCTL.bit.PHSDIR = TB_DOWN; // Count DOWN on sync (=90 deg)
      EPwm3Regs.TBCTL.bit.PRDLD = TB_SHADOW;
      EPwm3Regs.TBCTL.bit.SYNCOSEL = TB_SYNC_IN; // sync flow-through

      EPwm3Regs.TBCTL.bit.HSPCLKDIV = TB_DIV1; // TBCLK = SYSCLK
      EPwm3Regs.TBCTL.bit.CLKDIV = TB_DIV1;
      EPwm3Regs.ETSEL.bit.SOCAEN  = 1; // Enable SOC on A group

      EPwm3Regs.ETSEL.bit.SOCASEL = ET_CTR_ZERO; // Select SOC from from zero on upcount

      EPwm3Regs.ETPS.bit.SOCAPRD  = ET_1ST; // Generate pulse on 1st event
      EPwm3Regs.CMPA.half.CMPA = 150;    // Set compare A value
      EPwm3Regs.TBPRD          = 600; // Set period for ePWM3
      EPwm3Regs.TBCTL.bit.CTRMODE    = TB_COUNT_UP;       // count up and start

      EPwm3Regs.AQCTLA.bit.ZRO = AQ_SET;
      EPwm3Regs.AQCTLA.bit.CAU = AQ_CLEAR;
      EDIS;
}

void EPWM4_Init(void)
{
//
      // Assumes ePWM4 clock is already enabled in InitSysCtrl();
      //
EALLOW;
      EPwm4Regs.TBCTL.bit.PHSEN = TB_DISABLE; // Phase loading disabled
      EPwm4Regs.TBCTL.bit.PRDLD = TB_SHADOW;
      EPwm4Regs.TBCTL.bit.SYNCOSEL = TB_SYNC_DISABLE;
      EPwm4Regs.TBCTL.bit.HSPCLKDIV = TB_DIV1; // TBCLK = SYSCLK
      EPwm4Regs.TBCTL.bit.CLKDIV = TB_DIV1;

      EPwm4Regs.CMPA.half.CMPA = 0;    // Set compare A value
      EPwm4Regs.TBPRD          = 1500; // Set period for ePWM3 60M/40k=1500
      EPwm4Regs.TBCTL.bit.CTRMODE    = TB_COUNT_UP;       // count up and start
      EPwm4Regs.ETSEL.bit.INTSEL = ET_CTR_ZERO;    // Enable INT on Zero event
      EPwm4Regs.ETSEL.bit.INTEN = 1; // Enable INT
      EPwm4Regs.ETPS.bit.INTPRD = ET_1ST;          // Generate INT on 1th event

      EPwm4Regs.AQCTLA.bit.ZRO = AQ_SET;
      EPwm4Regs.AQCTLA.bit.CAU = AQ_CLEAR;
EDIS;
}

//use as DA output
void EPWM5_Init(void)
{
EALLOW;
EPwm5Regs.TBPRD = 1024; // Period = 1024 TBCLK counts
EPwm5Regs.CMPA.half.CMPA = 0; // Compare A = 350 TBCLK counts
EPwm5Regs.CMPB = 0; // Compare B = 200 TBCLK counts
EPwm5Regs.TBCTL.bit.CTRMODE = TB_COUNT_UP;
EPwm5Regs.TBCTL.bit.PHSEN = TB_DISABLE; // Phase loading disabled
EPwm5Regs.TBCTL.bit.PRDLD = TB_SHADOW;
EPwm5Regs.TBCTL.bit.SYNCOSEL = TB_SYNC_DISABLE;
EPwm5Regs.TBCTL.bit.HSPCLKDIV = TB_DIV1; // TBCLK = SYSCLK
EPwm5Regs.TBCTL.bit.CLKDIV = TB_DIV1;
EPwm5Regs.CMPCTL.bit.SHDWAMODE = CC_SHADOW;
EPwm5Regs.CMPCTL.bit.SHDWBMODE = CC_SHADOW;
EPwm5Regs.CMPCTL.bit.LOADAMODE = CC_CTR_ZERO; // load on CTR = Zero
EPwm5Regs.CMPCTL.bit.LOADBMODE = CC_CTR_ZERO; // load on CTR = Zero
EPwm5Regs.AQCTLA.bit.ZRO = AQ_SET;
EPwm5Regs.AQCTLA.bit.CAU = AQ_CLEAR;
EPwm5Regs.AQCTLB.bit.ZRO = AQ_SET;
EPwm5Regs.AQCTLB.bit.CBU = AQ_CLEAR;

EDIS;
}

void ADC_Init(void)
{

EALLOW;

AdcRegs.ADCCTL2.bit.ADCNONOVERLAP=1;//AD no overlap ADCNONOVERLAP
AdcRegs.ADCCTL2.bit.CLKDIV2EN=0; //CLKDIV2EN
AdcRegs.ADCSAMPLEMODE.bit.SIMULEN0=1;
AdcRegs.ADCSAMPLEMODE.bit.SIMULEN2=1;
AdcRegs.ADCSAMPLEMODE.bit.SIMULEN4=1;
AdcRegs.ADCSAMPLEMODE.bit.SIMULEN6=1;
AdcRegs.ADCSAMPLEMODE.bit.SIMULEN8=1;
AdcRegs.ADCSAMPLEMODE.bit.SIMULEN10=1;
AdcRegs.ADCSAMPLEMODE.bit.SIMULEN12=1;

AdcRegs.ADCSOC0CTL.bit.CHSEL = 3; //set SOC0 channel select to ADCINA0 ADCINB0
AdcRegs.ADCSOC2CTL.bit.CHSEL = 0; //set SOC2 channel select to ADCINA0 ADCINB0
AdcRegs.ADCSOC4CTL.bit.CHSEL = 1; //set SOC4 channel select to ADCINA1 ADCINB1
AdcRegs.ADCSOC6CTL.bit.CHSEL = 3; //set SOC6 channel select to ADCINA3 ADCINB3
AdcRegs.ADCSOC8CTL.bit.CHSEL = 5; //set SOC8 channel select to ADCINA5 ADCINB5
AdcRegs.ADCSOC10CTL.bit.CHSEL = 7; //set SOC10 channel select to ADCINA7 ADCINB7
AdcRegs.ADCSOC12CTL.bit.CHSEL = 7; //set SOC12 channel select to ADCINA7 ADCINB7
//
// set SOC0 start trigger on EPWM3A,

AdcRegs.ADCSOC0CTL.bit.TRIGSEL  = 0x09;
// AdcRegs.ADCSOC1CTL.bit.TRIGSEL  = 0x0A;
AdcRegs.ADCSOC2CTL.bit.TRIGSEL  = 0x09;
// AdcRegs.ADCSOC3CTL.bit.TRIGSEL  = 0x0A;
AdcRegs.ADCSOC4CTL.bit.TRIGSEL  = 0x09;
// AdcRegs.ADCSOC5CTL.bit.TRIGSEL  = 0x0A;
AdcRegs.ADCSOC6CTL.bit.TRIGSEL  = 0x09;
// AdcRegs.ADCSOC7CTL.bit.TRIGSEL  = 0x0A;
AdcRegs.ADCSOC8CTL.bit.TRIGSEL  = 0x09;
// AdcRegs.ADCSOC9CTL.bit.TRIGSEL  = 0x0A;
AdcRegs.ADCSOC10CTL.bit.TRIGSEL  = 0x09;
// AdcRegs.ADCSOC11CTL.bit.TRIGSEL  = 0x0A;
AdcRegs.ADCSOC12CTL.bit.TRIGSEL  = 0x09;
// AdcRegs.ADCSOC13CTL.bit.TRIGSEL  = 0x0A;

// set SOC0 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC0CTL.bit.ACQPS = 8;
// set SOC1 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC1CTL.bit.ACQPS = 8;
// set SOC2 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC2CTL.bit.ACQPS = 8;
// set SOC3 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC3CTL.bit.ACQPS = 8;
// set SOC4 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC4CTL.bit.ACQPS = 8;
// set SOC5 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC5CTL.bit.ACQPS = 8;
// set SOC6 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC6CTL.bit.ACQPS = 8;
// set SOC7 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC7CTL.bit.ACQPS = 8;
// set SOC8 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC8CTL.bit.ACQPS = 8;
// set SOC9 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC9CTL.bit.ACQPS = 8;
   // set SOC10 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC10CTL.bit.ACQPS = 8;
// set SOC11 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC11CTL.bit.ACQPS = 8;
// set SOC10 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC12CTL.bit.ACQPS = 8;
// set SOC11 S/H Window to 9 ADC Clock Cycles, (8 ACQPS plus 1)
AdcRegs.ADCSOC13CTL.bit.ACQPS = 8;

EDIS;
}

void GPIO_Init(void)
{

EALLOW;

         GpioCtrlRegs.GPAMUX1.bit.GPIO0=0; //PWM1A->GPIO0
         GpioCtrlRegs.GPAMUX1.bit.GPIO1=0; //PWM1B GPIO1
         GpioCtrlRegs.GPAMUX1.bit.GPIO2=0; //PWM2A GPIO2
         GpioCtrlRegs.GPAMUX1.bit.GPIO3=0; //PWM2B->GPIO3
         GpioCtrlRegs.GPADIR.bit.GPIO0=1;//GPIO0->output
         GpioCtrlRegs.GPADIR.bit.GPIO1=1;//GPIO1->output
         GpioCtrlRegs.GPADIR.bit.GPIO2=1;//GPIO2->output
         GpioCtrlRegs.GPADIR.bit.GPIO3=1;//GPIO3->output
         GpioDataRegs.GPACLEAR.bit.GPIO0=1;
         GpioDataRegs.GPACLEAR.bit.GPIO1=1;
         GpioDataRegs.GPACLEAR.bit.GPIO2=1;
         GpioDataRegs.GPACLEAR.bit.GPIO3=1;

//Set LED_Green Yellow RED
GpioCtrlRegs.GPAMUX2.bit.GPIO22=0; //GPIO22->LED_RED  output
GpioCtrlRegs.GPADIR.bit.GPIO22=1;//GPIO22->LED_RED  output

GpioCtrlRegs.GPBMUX1.bit.GPIO32=0; //GPIO32->LED_Green  output
GpioCtrlRegs.GPBDIR.bit.GPIO32=1;//GPIO32->LED_Green  output

GpioCtrlRegs.GPBMUX1.bit.GPIO33=0; //GPIO33->LED_Yellow  output
GpioCtrlRegs.GPBDIR.bit.GPIO33=1;//GPIO33->LED_Yellow  output

//Set AIO2/4/6/10/12/14  need to be configured chenmi 0908
GpioCtrlRegs.AIOMUX1.bit.AIO2 = 2; // AIO2 for CMP1A operation (AIO2=2 or 3 both used as ANA2 or COMP1A)

GpioCtrlRegs.GPBMUX1.bit.GPIO42=3; //GPIO42->COMP1_out

Comp1Regs.COMPCTL.bit.SYNCSEL = 1;

Comp1Regs.COMPCTL.bit.QUALSEL = 0x0001;

Comp1Regs.COMPCTL.bit.COMPSOURCE=0;//Inverting input of comparator connected to internal DAC

Comp1Regs.COMPCTL.bit.COMPDACEN=1;

Comp1Regs.COMPCTL.bit.CMPINV=1;//Inverted output of comparator is passed

Comp1Regs.DACCTL.bit.DACSOURCE=0;//DAC controlled by DACVAL

Comp1Regs.DACVAL.bit.DACVAL=620;//40A/66*1024=620  HW_OCP recoverable

GpioCtrlRegs.GPAMUX2.bit.GPIO17 = 3;//set GPIO17 AS TZ3
GpioCtrlRegs.GPAMUX1.bit.GPIO13 = 1;//set GPIO13 AS TZ2
GpioCtrlRegs.GPAMUX1.bit.GPIO15 = 1;//set GPIO15 AS TZ1

GpioCtrlRegs.GPAQSEL1.bit.GPIO13 = 3;  // Asynch input GPIO13 (TZ2)
GpioCtrlRegs.GPAQSEL1.bit.GPIO15 = 3;  // Asynch input GPIO15 (TZ1)
GpioCtrlRegs.GPAQSEL2.bit.GPIO17 = 3;  // Asynch input GPIO17 (TZ3)

GpioCtrlRegs.GPAPUD.bit.GPIO15 = 0; // Enable pull-up on GPIO15 (TZ1)
GpioCtrlRegs.GPAPUD.bit.GPIO13 = 0; // Enable pull-up on GPIO13 (TZ2)
GpioCtrlRegs.GPAPUD.bit.GPIO17 = 0; // Enable pull-up on GPIO17 (TZ3)

EDIS;

}

51hei截圖20200808144243.png (83.01 KB, 下載次數: 94)