国产欧美18一区二区,色色色狼男人网站,无翼乌之时间冻结能力

本設計系統包括了溫度測量單元，信號處理單元，A/D 轉換模塊，數據處理與控制模塊，溫度顯示五個部分。

仿真原理圖如下（proteus仿真工程文件可到本帖附件中下載）

單片機源程序如下:

#include <mega8.h>
//#include <delay.h>
#include <stdlib.h>
#include <string.h>
// Alphanumeric LCD Module functions
#asm
.equ __lcd_port=0x18 ;PORTB
#endasm
#include <lcd.h>
#include <delay.h>
#define ADC_VREF_TYPE 0xC0
#define MCPCS PORTD.0
#define MCPSCK PORTD.1
#define MCPDATA PIND.2
#define A 3.9083e-3
#define B -5.775e-7
#define C -4.183e-12
unsigned long read_spi(void);
float CalTem(float PT100R)
{
double fT,fR,fT0;
char i=0;
fR=PT100R;
fT0=(fR/100-1)/A;
return fT0;
};
unsigned long read_mcp(void)
{
long a[]={0,0,0,0,0};
long x=0;
char i=0;
char k=5; // 數組大小 -1
for (i=0;i<5;i++)
{
a[i]=read_spi(); // 連續3次讀出數據
delay_us(5);
}
//中值濾波
while (k>0)
{
for (i=0;(i<(k-1));i++) // 從低到高排序
{
if (a[i]>a[i+1])
{
x=a[i+1];
a[i+1]=a[i];
a[i]=x;
};
};
k--;
};
return a[2]; // 舍棄最大數據和最小數據。
}
unsigned long read_spi(void)
{
volatile char i=0;
volatile long int result=0,x=0;
MCPCS=0;// CS 先一個100us 低電平脈沖
delay_us(100);
MCPCS=1;
delay_ms(80); // 高電平等待80ms 等待轉換完成
MCPCS=0; // 置 CS 低電平開始發生 sck 脈沖
for (i=0; i<24;i++) // 24 位數據
{
MCPSCK=0; // sck 脈沖下降沿
delay_us(1); // 等5us 等待穩定
//result=result<<1;
x=MCPDATA; // 讀出一位
while (MCPDATA!=x) // 抖動處理 2次讀出電平相同說明數據穩定
{
delay_us(1);
x=MCPDATA;
};
result<<=1;
result|=x;//(x<<(23-i));
delay_us(5);
MCPSCK=1; // 發送sck 上升沿
delay_us(10);
};
MCPCS=1; // cs=1
return result>>6;
}
// Read the AD conversion result
unsigned int read_adc(unsigned char adc_input)
{
ADMUX=adc_input | (ADC_VREF_TYPE & 0xff);
// Delay needed for the stabilization of the ADC input voltage
delay_us(10);
// Start the AD conversion
ADCSRA|=0x40;
// Wait for the AD conversion to complete
while ((ADCSRA & 0x10)==0);
ADCSRA|=0x10;
return ADCW;
}
// 校準溫度計查表沒20度一個校準，
// -50 -30 -10 10 30 50 70 90 110 130 150
const float CAL_Tem[]={4.7 ,4.65,4.65,4.6,4.6 ,4.55,4.55,4.50,4.45,4.45,4.45};
const int ADCSTEP[]={ 1 ,96 ,189 ,282, 374,466 ,557 ,648,738,827 ,916};
float CalcuTem(int ADC) // 溫度校準計算沒有使用
{
int i=0;
float r;
for (i=0; i<10;i++)
{
if ((ADC<ADCSTEP[i+1])&&(ADC>=ADCSTEP[i])) break;
};
r=(ADC-ADCSTEP[i]);
r=r/CAL_Tem[i];
r=r-50;///CAL_Tem[i]-50+i*20+;
r=r+i*20.0;
return r;
}
volatile char stradc[15]="\0";
void main(void)
{
// Declare your local variables here
volatile long int MCPADC=0;
volatile unsigned int adc=0;
volatile float fadc=0;
// Input/Output Ports initialization
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTB=0x00;
DDRB=0x00;
// Port C initialization
// Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTC=0x00;
DDRC=0x00;
// Port D initialization
// Func7=out Func6=out Func5=out Func4=out Func3=out Func2=int Func1=out Func0=out
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=1
PORTD=0x07;
DDRD=0xFB;
// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
TCCR0=0x00;
TCNT0=0x00;
// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer 1 Stopped
// Mode: Normal top=FFFFh
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer 1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;
// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer 2 Stopped
// Mode: Normal top=FFh
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;
// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
MCUCR=0x00;
// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;
// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;
// ADC initialization
// ADC Clock frequency: 125.000 kHz
// ADC Voltage Reference: Int., cap. on AREF
ADMUX=ADC_VREF_TYPE & 0xff;
ADCSRA=0x86;
// LCD module initialization
lcd_init(16);
while (1)
{
MCPADC=0;
MCPADC=read_mcp();
// memset(stradc,' ',15);
// lcd_gotoxy(0,0);
// lcd_puts(stradc);
……………………
…………限于本文篇幅余下代碼請從51黑下載附件…………

復制代碼

所有資料51hei提供下載:

Pt100仿真程序.zip (89.83 KB, 下載次數: 35)

欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136