1024手机基地看电影,午夜福利视频导航,国产精品福利在线一区,亚洲欧美日韩另类成人,在线观看午夜日本理论片,成年超爽免费网站,国产精品成人免费,精品动作一级毛片,成人免费观看网站,97精品伊人久久大香蕉

標題: 時鐘萬年歷，keil，proteus仿真圖 [打印本頁]

作者: 書呆子 時間: 2018-7-15 10:39
標題: 時鐘萬年歷，keil，proteus仿真圖

關鍵代碼和注釋
//檢測1602 是否忙，如果忙，則等待，直到1602不忙為止。

sbit PLcdRS  =  P1^0 ;
sbit PLcdRW  =  P1^1 ;
sbit PLcdE =  P2^5 ;
#define PLCDDATA  P0
void vWaitNotBusy(void)
{
PLcdRS = 0 ;

PLcdRW = 1 ;

PLCDDATA = 0XFF;

   while ( PLCDDATA & 0x80 ) //為真，代表忙 1000 0000
{
_nop_();
PLcdE = 0 ;
_nop_();
PLcdE = 1 ;
_nop_();
  }
}
void vLcdCommand(unsigned char ucCommand)
{
vWaitNotBusy();
  PLcdRS = 0 ;
PLcdRW = 0 ;
  PLCDDATA = ucCommand ;
_nop_() ;
PLcdE = 1 ;
_nop_();
PLcdE = 0 ;
_nop_() ;
}
void vLcdData(unsigned char ucData)
{
vWaitNotBusy();
PLcdRS = 1 ;
PLcdRW = 0 ;
_nop_() ;//1us
PLcdE = 1 ;
PLCDDATA = ucData ;
_nop_();
PLcdE = 0 ;
_nop_() ;
}                            //需要等待液晶忙結束
void vLcdInit(void)
{
vLcdCommand(0x38);
vLcdCommand(0x0C);  //0C顯示屏幕，光標不顯示，并不閃爍
vLcdCommand(0x06);  // LCD模式設定,I/D=1(計數地址加1)
vLcdCommand(0x01);  //清除LCD的屏幕
#define  CLRS  0X01  //清除屏幕
#define  CURREST 0X02  //光標復位
#define  DISPLAY  0X0C //開啟顯示
#define  DISPLAYCUR  0X0E //開啟顯示，并顯示光標，光標不閃爍
#define  DISPLAYCUR  0X0F //開啟顯示，并顯示光標，光標閃爍

}
void vLcd1Char(unsigned char X,unsigned char Y,unsigned char ucChar)
{
Y &= 1;    //目的是保證行值為0或者1
X &= 15; //保證列值為0-15 0000 1111  列坐標，范圍0-15  ，
         if(Y == 1)
   {
   X |= 0x40 ;
   }
   X |= 0x80;                   //指令碼為地址碼+0X80
vLcdCommand(X);    //用命令的方式，發送一個地址，要顯示的地址？？？？。
//DDRAM

vLcdData(ucChar);
}
//計算下一個要顯示的字符，地址是否在16個字符范圍內。
void vLcdString(unsigned char X,unsigned char Y,unsigned char *ucString)
{
while(*ucString)
{
vLcd1Char(X,Y,*ucString);
   ucString ++ ;  //指令碼為地址碼+0X80
X++;
}
}
//lcd顯示16進制數據，
void vLcdHex(unsigned char X,unsigned char Y,unsigned char ucData)
{
unsigned char ucTemp;
ucTemp = (ucData & 0xf0) >> 4;
if(ucTemp >=0x0A)
{
ucTemp += 'A'; //x y ucdata 分別是列，行，數據。 0x39
  }
else
{
ucTemp += '0';
  }
vLcd1Char(X,Y,ucTemp );
ucTemp = (ucData & 0x0f);
if(ucTemp >=0x0A)
{
ucTemp += 'A';
  }
else
{
ucTemp += '0';
  }
   vLcd1Char(X+1,Y,ucTemp );
}
void vLcdDec(unsigned char X,unsigned char Y,unsigned char ucData)
{
unsigned char ucTemp;
ucTemp =  ucData /100;
ucTemp += '0';
vLcd1Char(X,Y,ucTemp );
ucTemp =  ucData %100 /10;
ucTemp += '0';
vLcd1Char(X+1,Y,ucTemp );
ucTemp =  ucData %10;    //lcd顯示10進制數據，

ucTemp += '0';
vLcd1Char(X+2,Y,ucTemp );
}
void WriteDs1302_1Byte(unsigned char  Address, unsigned char Data)
{
unsigned char i;

RST=0;
SCK=0;
RST=1;
for(i=0;i<8;i++)
{
SDA = Address & 0x01;
Address>>=1;
SCK=1;
SCK=0;
}
for(i=0;i<8;i++)
{
SDA=Data&0x01;
Data>>=1;
SCK=1;
SCK=0;
}
SCK=0;
RST=0;
}
unsigned char ReadDs1302_1Byte(unsigned char  Address)
{
unsigned char i;
unsigned char Data;
Data=0；
RST=0;
SCK=0;
RST=1;
for(i=0;i<8;i++)
{
SDA=Address&0x01;
Address>>=1;
SCK=1;
SCK=0;
}
for(i=0;i<7;i++)
{
if(SDA==1)
Data|=0x80;
Data>>=1;
SCK=1;
SCK=0;
}
SCK=0;
RST=0;
return Data;
}
void DS1302_Init(void)
{
WriteDs1302_1Byte(0x80,0x00);//允許時鐘運行
WriteDs1302_1Byte(0x8E,0x00);//允許寫

}

VHC9RD}W]]FLH`1VAG$%FL0.png (53.05 KB, 下載次數: 67)

歡迎光臨 (http://www.raoushi.com/bbs/)