精品女同性A片在线观看,十八禁无删减AV精品网站,九色porny真实首页

#include<reg52.h> //包含頭文件，一般情況不需要改動，頭文件包含特殊功能寄存器的定義
#include<intrins.h>
#include<stdio.h>
#include "18b20.h"
#include "delay.h"
#include "key.h"
#define uint unsigned int
#define uchar unsigned char
#define ZERO 4.5 //濕度傳感器放空氣中的電壓值對應濕度0%
#define FULL 0.45 //濕度傳感器放水中的電壓值對應濕度100%
float k,b;//計算濕度用斜率
sbit RS = P2^5; //定義LCD1602端口
sbit RW = P2^6;
sbit EN = P2^7;
#define DataPort P0
sbit CS = P2^0; //定義ADC0832端口
sbit CLK = P2^1;
sbit DIO = P2^2;
sbit MOETOR = P3^6;//水泵控制端口
#define RS_CLR RS=0
#define RS_SET RS=1
#define RW_CLR RW=0
#define RW_SET RW=1
#define EN_CLR EN=0
#define EN_SET EN=1
float d; //實時濕度值
int RH=50; //濕度上限
int RL=20; //濕度下限
unsigned char KeyValue; //返回按鍵值
int temp;
float temperature; //溫度值
char displaytemp[16];//定義顯示區域臨時存儲數組
/*------------------------------------------------
判忙函數
------------------------------------------------*/
bit LCD_Check_Busy(void)
{
unsigned char LCD_Status;
RS = 0;
RW = 1;
EN = 1;
DelayMs(1);
LCD_Status = P0;
EN = 0;
return LCD_Status;
}
/*------------------------------------------------
寫入命令函數
------------------------------------------------*/
void LCD_Write_Com(unsigned char com)
{
while((LCD_Check_Busy()&0x80)==0x80);
RS = 0;
RW = 0;
EN = 0;
P0 = com;
EN = 1;
DelayMs(1);
EN = 0;
}
/*------------------------------------------------
寫入數據函數
------------------------------------------------*/
void LCD_Write_Data(unsigned char Data)
{
while((LCD_Check_Busy()&0x80)==0x80);
RS = 1;
RW = 0;
EN = 0;
P0 = Data;
EN = 1;
DelayMs(1);
EN = 0;
}
/*------------------------------------------------
清屏函數
------------------------------------------------*/
void LCD_Clear(void)
{
LCD_Write_Com(0x01);
DelayMs(5);
}
/*------------------------------------------------
寫入字符串函數
------------------------------------------------*/
void LCD_Write_String(unsigned char x,unsigned char y,unsigned char *s)
{
if (y == 0)
{
LCD_Write_Com(0x80 + x); //表示第一行
}
else
{
LCD_Write_Com(0xC0 + x); //表示第二行
}
while (*s)
{
LCD_Write_Data( *s);
s ++;
}
}
/*------------------------------------------------
寫入字符函數
------------------------------------------------*/
void LCD_Write_Char(unsigned char x,unsigned char y,unsigned char Data)
{
if (y == 0)
{
LCD_Write_Com(0x80 + x);
}
else
{
LCD_Write_Com(0xC0 + x);
}
LCD_Write_Data( Data);
}
/*------------------------------------------------
初始化函數
------------------------------------------------*/
void LCD_Init(void)
{
LCD_Write_Com(0x38); /*顯示模式設置*/
DelayMs(5);
LCD_Write_Com(0x38);
DelayMs(5);
LCD_Write_Com(0x38);
DelayMs(5);
LCD_Write_Com(0x38);
DelayMs(5);
//LCD_Write_Com(0x08); /*顯示關閉*/
LCD_Write_Com(0x01); /*顯示清屏*/
DelayMs(5);
LCD_Write_Com(0x06); /*顯示光標移動設置*/
DelayMs(5);
LCD_Write_Com(0x0C); /*顯示開及光標設置*/
DelayMs(5);
}
unsigned char Get_AD_Result() //讀取AD值
{
uchar i,dat1=0,dat2=0;
CS = 0;
CLK = 0;
DIO = 1; _nop_(); _nop_();
CLK = 1; _nop_(); _nop_();
CLK = 0;DIO = 1; _nop_(); _nop_();
CLK = 1; _nop_(); _nop_();
CLK = 0;DIO = 1; _nop_(); _nop_();
CLK = 1;DIO = 1; _nop_(); _nop_();
CLK = 0;DIO = 1; _nop_(); _nop_();
for(i=0;i<8;i++)
{
CLK = 1; _nop_(); _nop_();
CLK = 0; _nop_(); _nop_();
dat1 = dat1 << 1 | DIO;
}
for(i=0;i<8;i++)
{
dat2 = dat2 << ((uchar)(DIO)<<i);
CLK = 1; _nop_(); _nop_();
CLK = 0; _nop_(); _nop_();
}
CS = 1;
return dat1; //== dat2) ? dat1:0;
}
/*------------------------------------------------
主函數
------------------------------------------------*/
void main(void)
{
LCD_Init();
DelayMs(10);
//Init_Timer0();
MOETOR =0; //默認水泵關閉
while (1)
{
KeyValue=KeyScan();
if(KeyValue!=0)//如果有鍵按下
{
Keyprocessing(KeyValue); //鍵值處理
}
temp=ReadTemperature(); //讀取溫度值
temperature=(float)temp*0.0625;
sprintf(displaytemp,"T =%3.1f",temperature);//
LCD_Write_String(0,0,displaytemp);// 顯示溫度值
d = Get_AD_Result()*5/255; //計算電壓值
k = 100/(FULL-ZERO); //根據空氣中和水中的電壓值列函數y=kx+b 計算 k b
b = 0-ZERO*k;
d = k*d+b; //計算實際的濕度值
if(d<0) d=0;
if(d>100) d=100;
//d = k*d+b;
sprintf(displaytemp,"R =%3.1f",d);//
LCD_Write_String(8,0,displaytemp);// 顯示濕度
sprintf(displaytemp,"RH=%2d",RH);//
LCD_Write_String(0,1,displaytemp);// 顯示濕度上限
sprintf(displaytemp,"RL=%2d",RL);//
LCD_Write_String(10,1,displaytemp);// 顯示濕度下限
if(d<RL) MOETOR =1; //低于下限開水泵
if(d>RH) MOETOR =0; //高于上限關水泵
DelayMs(300);
}
}

復制代碼

欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136